Skip to product information
About This Product
About This Product
- The occupancy sensor is a combination door-switch and room motion sensor powered by 2 AAA batteries that are included in the kit.
- Once wirelessly linked to Amana® Eden PTAC, the occupancy sensor monitors the room.
- When the room is unoccupied, the sensor automatically activates the temperature set-back function on the in-room PTAC. The setback function is a part of the Eden standard Energy Management System (EMS) in the Eden PTAC control board.
- The Eden EMS software can be set in up to 100,000 set-back combinations to maximize energy savings and is programmed through either the remote thermostat or the platform controller.
- The sensor communicates to the Amana Eden suite of devices via an encrypted 2.4 Ghz signal using the 802.15.4 standard.
- For the door sensor to operate, the in-room PTAC must be equipped with a Eden gateway antenna.
Specs & Details
OVERVIEW
| Brand | Amana® |
| Model | DD01E |
| Product | Eden™ Occupancy Sensor & Door Switch Combination Device |
| System | Eden™ Wireless Energy Management System (EMS) |
| Sensor Type | Passive infrared (PIR) motion sensor with magnetic door switch |
| Power | Battery powered |
| Communication | Wireless, to the PTAC's DT01 antenna |
| Installation | Self-installable; no wiring to run |
HOW IT WORKS
| Occupancy Detection | Infrared sensor and door switch determine when the guest room is occupied |
| Energy Saving | When the room is empty, signals the PTAC to move through programmable temperature set-backs |
| Example Set-Backs | 2° after 30 min, 4° after 1 hr, 8° after 3 hrs (adjustable) |
| Auto-Configuration | PTAC control automatically activates its energy management routine once the DD01E is installed and bound |
| Estimated Savings | Up to 35% or more PTAC energy reduction as part of the Eden system* |
INSTALLATION
| Magnet Spacing | Center of the magnet must be 15/16" from the sensor mounting plate (alignment guides on the bottom of the DD01E) |
| Magnet Positions | A, B or C, selected to achieve the 15/16" spacing |
| Door Test | Green light shows when the door is closed and turns off when it opens; verify before binding |
| Devices per PTAC | One DD01E per Digi Smart™ PTAC |
| Binding | If a DS01 wireless thermostat is also used, both devices must be bound in the same learn operation |
SYSTEM REQUIREMENTS
| Required on PTAC | DT01 wireless gateway antenna |
| Compatible Units | Amana® Digi Smart™ / Eden-ready PTACs |
| With Front-Desk Platform | If using the DL01E controller, room numbers must be programmed in the PTAC before binding |
| Works With | DS01 wireless thermostat, DT01 antenna, DL01E web platform controller |